ALL COMPONENTS FROM ORIGINAL
Tested Librepilot 16.09
Loaded 16.09 Firmware
Features:
• Open source firmware development support
• Flexi-IO Port for input/output
• MainPort (Telemetry) serial USART / SBUS
• FlexiPort for telemetry funtions
• 433MHz RF with PPM control
• Power Sensor Port
• STM32F4 32 bit MCU
• USB2.0, SPI, USART
• CAN Bus Port which is for talking to external devices like the brushless gimbal to coordinate POI tracking or control the gimbal pitch from transmitter
• MPU-9250 combined gyro, accelerometer, magnetometer
• Barometric pressure sensor
• Four buffered outputs to drive either LEDs (indicate flight status) or brushed motors
• PWM/PPM for configuration with Futaba, FrSky, Spektrum (inc satellite) receivers
Specfitcations:
Input voltage: 5V
Telemetry link: 433MHz
Recevier connectors: 3 pin header
Antenna connector: IPEX
Dimensions: 36 x 36mm
Weight: 14g
Package Included:
Taulabs Sparky 2.0 Flight Controller x 1
6 pin cable x 1
4 pin cable x 3
Antenna with connector x 1
18 pin straight header x 1
18 pin angle header x 1
3 pin angle header x 1
[ITEMPRICE]