Version Info: As of 7/26/2023 this model now comes with the upgraded 3658-2150Kv inrunner brushless motor and a newly designed 12-Blade EDF.
Motion RC is excited to announce the new Freewing T-33 Shooting Star in 1/9.5 scale. Honoring the popular T-33 that flew with over 40 countries between 1948 and 2017, the Freewing T-33 faithfully represents this amazing aircraft!
Constructed from EPO foam, carbon, wood, aluminum, and other materials, the Freewing T-33 is powered by an 80mm EDF power system optimized for performance and easy flying behavior. Its wide 1350mm (53") wingspan offers a light wing loading that allows for very stable flight and a mild gentle stall. Scale split flaps and robust aluminum trailing link suspension landing gear makes taking off from and landing on grass runways an easy operation. Removable tip tanks, an accurate overall outline, and landing gear doors enhance the scale fidelity of this model aircraft. With a quick and easy screw together assembly that is convenient for pilots wanting to get in the air quickly.
The Freewing T-33's power system provides performance that is similar to other recent 80mm Freewing jets such as the popular Avanti S and L-39 Albatros but is now powered by a 2150Kv Inrunner! The 100A ESC provided ample headroom for high power use and the 12 blade EDF provides a proven efficiency that thousands of Freewing jets have had worldwide. Rapid acceleration, low cruising altitude position, and efficient energy consumption are key features of the Freewing T-33. Although it's wingspan is greater than more expensive 90mm jets, the T-33 is affordable to operate and makes a perfect EDF trainer jet for new jet pilots moving up from smaller 64mm and 70mm jets
Ample Canopy and Battery Space
The T-33 has plenty of space in the battery compartment for any size of battery you need, plus added accessories if desired.
Clean Fit Landing Gear Doors
The landing gear doors have a nice, tight and clean fit for that ultra scale look pilots covet.
Scale Split Flaps
The scale split flaps are another nice feature adding to the realism of the model.
Molded Plastic On Intakes
Plastic intakes not only create a clean look but are functional in protecting the leading edge of the intakes from damage.
Robust Main Gears
The gears are a robust metal spring-loaded for both pavement and grass.
Inrunner Motor Preinstalled
A highly efficient inrunner brushless motor is pre-installed, providing a top speed in excess of 100mph / 160kph!
CG Mark Pre-Molded
The CG mark has been pre-molded into the model for your convenience.
Brass Ball Links
Positive control is afforded by strong servos and brass ball links that reduce slop in the control armature.
Nylon Hinges Throughout
Nylon hinges throughout the model for durability.
Removable Tip Tanks
The tip tanks are easily removable for transport.
PRODUCT SPECIFICATIONS:
Model Scale
1/10 Scale
Wingspan
1350mm / 53in
Length
1200mm / 47in
Weight
2350g / 83oz (w/o battery)
CG (Center of Gravity)
95mm from the leading edge of the wing at the root
Power System
6S 3658-2150Kv Inrunner Motor (included)
Electronic Speed Control
100A with 5A UBEC (included)
Propeller / EDF
80mm 12-Blade EDF (included)
Servos
Landing Gear
Electronic retractable aluminum trailing link (included)
Required Battery
6S 22.2V 4000-6000mAh LiPo with EC5 Connector (required)
Required Radio
6+ Channel (required)
Ailerons
Elevator
Yes
Rudder
Flaps
Lights
No
Hinge Type
Nylon
Material
Skill Level
Build Time
Recommended Environment
[ITEMPRICE]