The old SKU is FMS-ESC-70A 5A SBEC(200mm length cable)
This ESC has a male T-connector for connection to your LiPo battery pack and pre-soldered bullets for easy connection to your motor. The built in 5A SBEC (switched BEC) will provide power to the receiver, servos, lights, and retracts directly from your LiPo flight pack. This ESC is burstable to 80A for 10 seconds. Voltage provided from the ESC is 5.5V. This ESC weighs 79g and will work with a 2 cell to 6 cell LiPo. This ESC is fully programmable using your radio or a programming card. Size is 68mm x 37mm x 14mm
This ESC is standard on the following:
1400mm P-51D (V7 & V8)/ P-51B/ F4U (V3)/ T-28 / Zero/ FW190/ BF109/ P40B
1400mm F3A
1100mm Critical Mass/ P-51/ F2G(high speed)/ NXT
980mm P-47/ 980mm P40(high speed) /P-39
70mm F-4/ Alpha
- Located in Hong Kong close to every main manufacturer- Low logistic cost and time from manufacturer - Free to export/import most merchandise from HK Customs
PNP (Plug and Play) – Motor, servos and ESCs are installed on the plane. Additional radio system, battery and charger are required in order to fly the plane
KIT – Package does not contain any electronics such as motor, servos, ESCs and radio but the plane itself. KIT package from different manufacturer has different level of completeness
RTF (Ready to fly) – Package includes everything you need to fly with all the electronics installed such as receiver and battery (uncharged). Batteries for transmitter and basic installation of plane parts are required.
KIT+ (KIT Plus) – KIT package plus some specific parts, KIT + Motor + Propeller etc. The specific parts will be place in the same shipping package but they may not be installed.
[ITEMPRICE]