Features
Highly detailed pre-painted scale EPO foam airframe.
Fast, glue- and screw-together assembly.
Pre-installed high-quality hardware (motors, fans, ESCs, servos & retracts).
Superior ball joint control linkages.
Performance-optimised power-to-weight ratio.
Latch-retained canopy for easy battery access.
Scale, sprung retractable landing gear.
Suits 6S 22.2V 3300 to 4000mAh 35C LiPo.
Nine pre-installed 9g high-quality digital servos.
Takes standard 6-channel radio.
Magnetic, detachable nose cone.
Specifications
Approximate Flying Duration:?4 min
CG (Center of Gravity):
125-135mm from the leading edge
Power System:
Brushless 2840-2280kV x2 units
Electronic Speed Control:
Twin 40A ESC with 5.5V 5A BEC
Propeller / EDF:
64mm 12 blade EDF unit (x2 units)
Servos
9g plastic servos x 9 units
Landing Gear
Electronic retractable main gear
Required Battery:
22.2V 3300mAh 35C
Required Radio:
6 Channel transmitter and receiver required
Build Time:
15 minutes
Needed to Complete
This is a PNP Version RC Airplane and requires
1x 6-channel transmitter and receiver combo.
1x 6S 3300 to 4000mAh 35C LiPo with EC5 connector.
1x 6S compatible LiPo balance charger. to be complete.
[ITEMPRICE]