Freewing F/A-18C Hornet "Base Gray" 90mm EDF Jet PNP

FEATURES:

• NEW! Lightweight 9-Blade factory balanced EDF combined with a powerful brushless 3672-1900Kv inrunner motor
• NEW! Upgraded 17g digital metal gear elevator servos and upgraded 9g digital metal gear flap servos
• NEW! Reinforced and improved elevator assembly process
• This is not a V3, but a completely new design/variant from the ground-up
• F/A-18C “Legacy”, the world’s first C variant 90mm PNP
• 6S 5000-6000mAh lipo can easily achieve 4-5+ minutes of managed flight time (see our video in the video tab above)
• Manufactured with durable and quality EPO foam, not EPS
• Complete screw-together assembly without the need for any glue
• Scale outline, including open vents between the fuselage and intakes, and downward angled wingtip rails never before seen in a foam F-18
• Completely concealed elevator servos and elevator control hardware for less drag and clean scale outline
• Full coverage plastic undercarriage doors
• Aluminum suspension undercarriage
• Trailing link struts
• Low visibility rudder servo placement
• Low visibility flap servo placement and geometry
• All-new plastic Fowler flap arm hinges to mimic those on the real F-18
• Removable plastic-tipped magnetic nose cone
• Removable wings with QD wing harness
• LED lighting on nose strut, chines, and dorsal
• Large battery bay for battery, MFCB, and gyro
• Sharp and shallow panel lines in sensible areas without reducing overall scale effect
• Pre-molded wing station to accept Freewing’s MWS plastic slot system (aftermarket pylons, ordnance, 3DP, Runcam, etc)
• Quick Service servo plates on the wings and vertical stabilizers (screws, not glue)
• Plastic lined coaming to resist bubbling under the canopy
• Plastic tipped nosecone, capped intake lips and wingtip rails with pre-installed MWS slot
• Plastic nozzles with two-tone metallic paint job

INCLUDES:

• Freewing F/A-18C Hornet "Base Gray" High Performance 90mm EDF Jet - PNP
• 9-Blade EDF power system (installed)
• 3672-1900Kv inrunner brushless motor (installed)
• 130A ESC with EC5 connector (installed)
• Electronic retractable landing gear (installed)
• Servos, LED Lights (installed)

REQUIRES:

• 6 Channel radio - select a minimum 6 channel radio 
• 6 Channel receiver - select a minimum 6 channel receiver 
• 6 Cell 22.2V 5000-6000 mAh LiPo battery with EC5 connector 
• 6 Cell compatible battery charger - select a minimum 6 cell (6S) charger