Shopping Bag0 item(s) in cart/ Total(USD): $0
FMS 1450MM P51D V8 (BBD) PNP No Radio
FMS 1450MM P51D V8 (BBD) PNP No Radio

FMS 1450MM P51D V8 (BBD) PNP No Radio

Your Price: $232.50
Out of Stock.
Part Number:FMS008PBBD

Key Features

  • Made of Durable EPO Foam
  • Upgraded landing gear featuring slower scale-like action
  • Shock absorbing struts with 4mm diameter lower section
  • FMS sequencer which closes the gear doors after gear is down
  • Removable sliding battery tray
  • Upgraded Horizontal and Vertical stabs with hard points for glueless assembly (NOTE: New V8 tails surfaces will not fit on the older versions of the P-51)
  • 9g and 17g digital metal gear servos
  • Sliding canopy
  • Open air intake
  • 70A ESC with 5A SBEC
  • FMS gold PAEP motor
Specification:
Aileron:Yes
Approximate Assembly Time:Less than 1 Hour
Approximate Flight Time:8 minutes
Battery:Li-Po 14.8V 2600mAh 25C
CG (Center of Gravity):4.3 in (110mm) From Leading Edge
Completion Level:Plug-N-Play
Elevator:Yes
Flaps:Yes
Flying Weight:Approximately 82.9 oz (2350g)
Length:49 in (1240mm)
Material:Durable EPO
Minimum Required Radio:6 Channel
Motor Size:Brushless 4250-KV540
Propeller Size:14x8
Retracts:Yes
Rudder:Yes
Servos:(6) 9G Servo, (3) 17G Servo
Speed Control:70A with 5A SBEC
Wing Area:553.35 sq in (35.4 sq dm)
Wing Loading:0.15oz/sq in (66g/sq dm)
Wingspan:57 in (1450mm)

Need to complete:
  • 6+ Channel Radio System
  • LiPo Battery
  • LiPo Charger

Warning: Receiver compatibility issue.
It has been known that FMS slow flap servos don't work with receivers with PWM output frequency lower than 50Hz. One of the receivers we know with compatibility issue is Frsky receivers. 
If you are using FUTABA radio, please use original FUTABA receivers or PowerUP receivers which can be found in PorcupineRC store.

Related Items

Recently Viewed Items